Dry/Wet Sintered Diamond Core Drill Bits
Cut perfect circles with these tools. Suitable for Marble, Granite, Tile Ceramic, Stone, Rebar Concrete etcThese hole saws feature thicker walls to minimize loss and improve durability, with hard and sharp material to cut fasterthan previous hole saws.Feature drilling stably, fast speed, not breaking the border, to prolong its using life, must use withwater for cooling and lubrication.
Product Name | Sintered Diamond Core Drill Bits | |||
Material | Diamond | |||
Shank | M14 | |||
Diameter | 6mm-120mm | |||
Length | 68mm/78mm/83mm/88mm/98mm | |||
Application | For glass, marble, granite,ceramic tile, procelin tile |
Thread | Diameter/mm | Length/mm |
M14 | Φ6 | 68/78/83/88/98mm |
Φ8 | ||
Φ10 | ||
Φ12 | ||
Φ14 | ||
Φ16 | ||
Φ18 | ||
Φ20 | ||
Φ22 | ||
Φ25 | ||
Φ28 | ||
Φ30- Φ75 | ||
Φ80- Φ100 | ||
Φ110 - Φ120 |
Can Drill accurate holes on concrete, masonry, brick, marble, stone, marble, glass, tile and other hard materials.
When using a hand electric drill, make a mark on the cutting material in 45 degree angle. Then you can drill holes in vertical.
Can be Wet or Dry use. To prolong its using life, it must be used with water for cooling and lubrication.
Operation Tips
Use a small feeding force at the beginning of drilling, and then increase the downward pressure after positioning.When drilling through the workplace, the drilling feed speed should be slowed down and the force should not be large to avoid violent impact to damage the hole wall.Add coolant during the drilling process to prevent damage caused by high temperature. When opening the hole, Pay attention to wearing protective gloves, glasses, etc.
Dry/Wet Sintered Diamond Core Drill Bits
Cut perfect circles with these tools. Suitable for Marble, Granite, Tile Ceramic, Stone, Rebar Concrete etcThese hole saws feature thicker walls to minimize loss and improve durability, with hard and sharp material to cut fasterthan previous hole saws.Feature drilling stably, fast speed, not breaking the border, to prolong its using life, must use withwater for cooling and lubrication.
Product Name | Sintered Diamond Core Drill Bits | |||
Material | Diamond | |||
Shank | M14 | |||
Diameter | 6mm-120mm | |||
Length | 68mm/78mm/83mm/88mm/98mm | |||
Application | For glass, marble, granite,ceramic tile, procelin tile |
Thread | Diameter/mm | Length/mm |
M14 | Φ6 | 68/78/83/88/98mm |
Φ8 | ||
Φ10 | ||
Φ12 | ||
Φ14 | ||
Φ16 | ||
Φ18 | ||
Φ20 | ||
Φ22 | ||
Φ25 | ||
Φ28 | ||
Φ30- Φ75 | ||
Φ80- Φ100 | ||
Φ110 - Φ120 |
Can Drill accurate holes on concrete, masonry, brick, marble, stone, marble, glass, tile and other hard materials.
When using a hand electric drill, make a mark on the cutting material in 45 degree angle. Then you can drill holes in vertical.
Can be Wet or Dry use. To prolong its using life, it must be used with water for cooling and lubrication.
Operation Tips
Use a small feeding force at the beginning of drilling, and then increase the downward pressure after positioning.When drilling through the workplace, the drilling feed speed should be slowed down and the force should not be large to avoid violent impact to damage the hole wall.Add coolant during the drilling process to prevent damage caused by high temperature. When opening the hole, Pay attention to wearing protective gloves, glasses, etc.