DCH273KN
| Quantity: | |
|---|---|
DEWALT 20V Lithium Brushless 24mm 3-mode SDS-PULS®Electric Hammer
| Power type | Lithium 20Vmax |
| Voltage | 18 |
| Battery type | Lithium-ion |
| Motor type | brushless |
| Weight (kg) | 3.1 |
| Chuck type | SDS-Puls four pits |
| Number of shocks per minute (ipm) | 0-4600 |
| Operation mode | Chisel |
| Maximum impact kinetic energy (J) | 2.4 |
| Vibration level (m/s²) | 6.6 |
| Length (mm) | 301 |
| Height (mm) | 202 |
| No-load speed (rpm) high | 0-1100 |
| Maximum borehole (metal) (mm) | 13 |
| Maximum borehole (wood) (mm) | 26 |
| Maximum borehole (concrete) (mm) | 14 |
| Impact energy (J) | 2.1 |
| Optimal drilling range (concrete) (mm) 4-12 | 4-12 |
| LED | Yes |
Three modes: Drill, Hammer Drill/Chisel
Constant speed: Maintain constant speed under operating load
Electronic speed control: Speed can be adjusted from low speed to increase control in every application
Forward and reverse function: forward and reverse action of the application
Low vibration side handle: damping mechanism to reduce arm vibration level
Anti-vibration floating handle: The entire handle is completely damped from top to bottom to reduce vibration and improve comfort and efficiency
Clutch: Mechanical or electronic clutches slow the rebound and protect the operator in the event of a jam or stall
Brushless machine
DEWALT 20V Lithium Brushless 24mm 3-mode SDS-PULS®Electric Hammer
| Power type | Lithium 20Vmax |
| Voltage | 18 |
| Battery type | Lithium-ion |
| Motor type | brushless |
| Weight (kg) | 3.1 |
| Chuck type | SDS-Puls four pits |
| Number of shocks per minute (ipm) | 0-4600 |
| Operation mode | Chisel |
| Maximum impact kinetic energy (J) | 2.4 |
| Vibration level (m/s²) | 6.6 |
| Length (mm) | 301 |
| Height (mm) | 202 |
| No-load speed (rpm) high | 0-1100 |
| Maximum borehole (metal) (mm) | 13 |
| Maximum borehole (wood) (mm) | 26 |
| Maximum borehole (concrete) (mm) | 14 |
| Impact energy (J) | 2.1 |
| Optimal drilling range (concrete) (mm) 4-12 | 4-12 |
| LED | Yes |
Three modes: Drill, Hammer Drill/Chisel
Constant speed: Maintain constant speed under operating load
Electronic speed control: Speed can be adjusted from low speed to increase control in every application
Forward and reverse function: forward and reverse action of the application
Low vibration side handle: damping mechanism to reduce arm vibration level
Anti-vibration floating handle: The entire handle is completely damped from top to bottom to reduce vibration and improve comfort and efficiency
Clutch: Mechanical or electronic clutches slow the rebound and protect the operator in the event of a jam or stall
Brushless machine
