| Quantity: | |
|---|---|
Engineered for job-site reliability and fabrication shops alike, this hot-pressed, sintered segmented diamond stone saw blade delivers fast, stable cutting across concrete, masonry, brick, block, granite and marble. Use it wet or dry on popular handheld and bench-top machines. As a direct manufacturer at SENMINE, we tune bond hardness and segment geometry for the right balance of speed and life in real-world materials.
| Diameter | Segment | Inner Hole |
| 4" - 105mm | 10*1.6mm | 20/22.23mm |
| 4.5" - 115mm | 10*1.6mm | 20/22.23mm |
| 5" - 125mm | 10*1.6mm | 20/22.23mm |
•Wet/Dry versatility — cut on site with minimal setup; add water to reduce heat and dust, extend blade life, and improve edge quality.
•Hot-pressed sintered segments — dense matrix with consistent diamond exposure for longer service life and fewer dressing stops.
•Fast, smooth cutting — performance segmented rim clears swarf efficiently for stable feed and fewer edge chips.
•Wide material coverage — concrete, masonry, brick, block, granite, marble.
•Broad machine compatibility — fits most angle grinders, circular saws, masonry saws and table saws.
•Customization available — diameters, bonds, segment specs, arbors and private label upon request.
•Cutting openings, trimming blocks and pavers, groove and channel cuts in concrete and masonry.
•Countertop and stone shop tasks on granite and marble where segmented rims are preferred for speed.
•General construction and renovation where tool-change time and blade life both matter.
•For the longest life, run wet when feasible; for dry cuts, use light, steady feed and allow free airflow.
•If performance slows, dress the blade on an abrasive block.
•Replace worn blades following best practice—see our Blade Replacement Guide for step-by-step instructions.
•Diameters beyond 125 mm, alternative segment heights/thicknesses, and bond grades tailored to specific aggregates.
•Private logo printing, label and carton design.
•Arbors: 20 mm, 22.23 mm, 25.4 mm (1″), and custom bores.
•Typical MOQ: 10 pcs per spec; mixed sizes available for trial orders.
With 12+ years focused on precision diamond tooling, SENMINE controls material selection, hot-press parameters and QC testing end-to-end to deliver predictable cutting speed and wear. Global shipping and responsive technical support keep your projects on schedule.
For optimal cutting performance and extended blade life, follow our detailed Blade Replacement Guide. Ensure safe and precise operation every time.
FAQ
Engineered for job-site reliability and fabrication shops alike, this hot-pressed, sintered segmented diamond stone saw blade delivers fast, stable cutting across concrete, masonry, brick, block, granite and marble. Use it wet or dry on popular handheld and bench-top machines. As a direct manufacturer at SENMINE, we tune bond hardness and segment geometry for the right balance of speed and life in real-world materials.
| Diameter | Segment | Inner Hole |
| 4" - 105mm | 10*1.6mm | 20/22.23mm |
| 4.5" - 115mm | 10*1.6mm | 20/22.23mm |
| 5" - 125mm | 10*1.6mm | 20/22.23mm |
•Wet/Dry versatility — cut on site with minimal setup; add water to reduce heat and dust, extend blade life, and improve edge quality.
•Hot-pressed sintered segments — dense matrix with consistent diamond exposure for longer service life and fewer dressing stops.
•Fast, smooth cutting — performance segmented rim clears swarf efficiently for stable feed and fewer edge chips.
•Wide material coverage — concrete, masonry, brick, block, granite, marble.
•Broad machine compatibility — fits most angle grinders, circular saws, masonry saws and table saws.
•Customization available — diameters, bonds, segment specs, arbors and private label upon request.
•Cutting openings, trimming blocks and pavers, groove and channel cuts in concrete and masonry.
•Countertop and stone shop tasks on granite and marble where segmented rims are preferred for speed.
•General construction and renovation where tool-change time and blade life both matter.
•For the longest life, run wet when feasible; for dry cuts, use light, steady feed and allow free airflow.
•If performance slows, dress the blade on an abrasive block.
•Replace worn blades following best practice—see our Blade Replacement Guide for step-by-step instructions.
•Diameters beyond 125 mm, alternative segment heights/thicknesses, and bond grades tailored to specific aggregates.
•Private logo printing, label and carton design.
•Arbors: 20 mm, 22.23 mm, 25.4 mm (1″), and custom bores.
•Typical MOQ: 10 pcs per spec; mixed sizes available for trial orders.
With 12+ years focused on precision diamond tooling, SENMINE controls material selection, hot-press parameters and QC testing end-to-end to deliver predictable cutting speed and wear. Global shipping and responsive technical support keep your projects on schedule.
For optimal cutting performance and extended blade life, follow our detailed Blade Replacement Guide. Ensure safe and precise operation every time.
FAQ
